How to Dry Wet Wood Fast
How to dry wood fast for woodworking?
When wood is cut from a tree, it contains a lot of moisture. When it loses moisture, it contracts unequally resulting in a deformed shape. That’s why, to keep woodworks from twisting, breaking, or getting deformed, it becomes increasingly essential to dry the wood before starting to work on it.
Drying wood for carpentry is not a complex and costly method as some people think; however, if traditional methods are used to dry the wood, it requires a long period, especially for wet wood. Using the traditional air-drying method can take a year or more for one inch of thickness, which is indeed very long if you want to do quick woodwork.
Drying time depends upon different factors involving moisture levels, wood types, and timber thickness; however, you have the option of drying wood quickly by microwaving small amounts of wood or figuring out how to quicken the drying process for large pieces of wood.
When the wood isn’t appropriately dried during the first two years of being sliced, it will start to twist, so it becomes necessary to discover the different drying procedures that suit your needs to keep up quality craftsmanship.
Although it is possible to work with green timber, it isn’t recommended to do so because wood quickly assimilates dampness and loses it gradually. The results you can expect when starting carpentry ventures with wet timber are distorted materials and unattractive split joints.
Drying Wood Fast
These are some of the most efficient and effective methods to dry the wood quickly.
Drying Wood in Microwave
Unless you have access to a mechanical wood drying microwave like the MAX Microwave Dryer, this procedure is only feasible for smaller pieces of wood that can fit well into a microwave. This method of drying is exceptionally effective in delivering the ideal outcome by rapidly expelling water content from the wood.
When utilizing this wood drying technique, you should be aware of the fact that heating wood for a long time will burn it. Microwaving the wood for 2 minutes for 1.5 inches thickness is a perfect period for drying a piece of wood.
It is recommended to use a moisture meter to check the dampness of the wood from time to time to protect your wood from over-drying or burning.
Although it is a much quicker method to dry the wood in comparison to air drying, yet it is only possible for smaller pieces of wood. If you are working with green wood or wood having more than normal levels of moisture, then this method is a great option for you.
Drying Wood in a Kiln
Drying your wood in a kiln is an extraordinary method to dry it sufficiently quickly and start making furniture with it at a reasonable cost. If you own a kiln and the pieces of wood you need to dry are not too large, then definitely proceed with this method. You will be able to get dry wood in two or three hours.
Drying wood in a kiln is more proficient than air-drying lumber as you can control both the temperature and dampness, as well as steam levels. However, when using this method, keep in mind that there are restrains as far as the length of your timber is concerned.
Drying Process for Large Lumber
When drying large size wood keep in mind that if you cut down a tree, you have to turn into lumber as soon as possible. This will help in opening up and drying process of wood. Put the wood in an indoor place such as a shed or when you want to put the wood at some outdoor location, make sure that it is in the shade.
Try to avoid places having low airflow. Put the wood in an area having a similar environment and moisture that your finished product will be exposed to. You can use an electric fan to increase the airflow.
This will increase the drying time manifolds. When you cut your lumber, don’t forget to seal off both ends to prevent moisture decay. It is necessary because the moisture from the ends escapes at a much higher rate.